Reveal Dimensions

This page outlines information regarding cabinet front reveal dimensions and measurements. Please note that specification drawings are not to scale and are intended for illustrative purposes only. Minor differences between the information here and the final products may exist.

 

Notes:

  • Reveal refers to the measured distance between the outer edge of a cabinet front and the outer edge of the hosting cabinet box. 
  • Cabinet front dimensions are smaller than the exact width and height of their hosting cabinets.
  • Reveal and gap spacings are approximate, however, front dimensions are exact and the reveal dimensions outlined here can be used to determine the precise size of every cabinet front. 
  • Complimentary product panels are sized using the same spacing considerations described here to maintain consistent alignment.
  • Front positions are adjustable on-site to re-align reveals after delivery & installation.
  • If ordering custom products, please consider reveal measurements for consistent alignment throughout your design. 

     

    Reveal Dimension Schematics

    There is a legend at the bottom of this page describing any variables shown in the schematics below. 

     

    Schematic Legend:

    The following table clarifies any text variables shown in the schematics above.

    Label/notation Description and/or measurement
    1

    Reveal in the height direction (top and bottom reveals).

    2

     Reveal in the width direction (side reveals).
    3

     Gap in the width direction between two cabinet fronts.
    4

     Gap in the height direction between two cabinet fronts.
    a

    Standard side reveal for base, wall, and tall cabinets (width direction).

    = 0.0625'' (1/16'')
    b

     Top reveal for wall and tall cabinets (height direction).

    = 0.125'' (1/8'')
    c

     Bottom reveal for wall cabinets (height direction).

    ~ 0'' (flush)
    d

    Top reveal for base cabinets (height direction).

    = 0.25'' (1/4'')
    e

    Bottom reveal for base and tall cabinets (height direction).

    ~ 0'' (flush)
    f

    Gap between fronts (width direction)

    = 0.125'' (1/8'')
    g

    Gap between fronts (height direction)

    = 0.125'' (1/8'')